Daily Processing of 3-5 Tons of Rotary Grate Type Household Waste Incinerator

• Customization: Available
• After-sales Service: Lifetime Technical Services
• Warranty: 1 Year
• Model NO.: LDF-500G
• Condition: New
• Certification: ISO, CE
• Automation: Automatic
• Screw: Multi-Screw
• Treatment: Burning
• Voltage: 380V50/60Hz
• Power: 13kw
• Fuel Consumption: 15-25kg/H
• Processing Capacity: 500 Kilograms Per Session
• Service Life: 20 Years
• Transport Package: Naked Bag
• Specification: Can be customized
• Trademark: lvdu
• Origin: Shandong China
• HS Code: 8417809090
• Production Capacity: 1000 Pieces Year

Product Description

Product Description

 

Design Basis:
1. Furnace type: High temperature pyrolysis vertical incinerator
2. Processing capacity: 3-5 tons/day
3. Ignition method: Automatic ignition by diesel combustion engine or gas combustion engine
4. Feeding methods: bucket lifting, grab feeding, spiral conveying, belt conveying
5. Slag removal method: automatic ash removal, manual transfer of ash hopper, scraper slag removal machine Ash removal vehicle transportation
6. Furnace pressure:- 50Pa~-100Pa
7. Design calorific value: 4100KJ
8. Waste gas treatment methods: rapid cooling deacidification tower, deep dust removal dehydration tower, activated carbon adsorption
Bag dust removal.
9. Combustion chamber temperature: 600-850 ºC
10. Secondary chamber temperature: 850-1100 ºC
11. Smoke emissions shall comply with GB18485-2014 "Pollution Control Standards for Garbage Incineration"
 

Detailed Photos

 

NO	Name	Qty	Parameter configuration	picture
1	LDF-750G incinerator	1	Primary Pyrolytic Gasification+Circular Wind Mixed Combustion+Secondary High Temperature Combustion+Burneout Treatment Incineration Method.+Wet Exhaust Gas Treatment System 2. Primary combustion chamber volume: >=5.5m³ 3. Secondary combustion chamber volume: >=2.2m 4. Main combustion chamber temperature: >=400-950ºC 5. Secondary combustion chamber temperature: >=900-1300ºC 6. Material: The furnace body is made of Q235 steel plate, lined with high aluminum refractory brick + high temperature refractory insulation material, thickness >=300, temperature resistance >=1800 7. Incineration capacity: 600-700 kg/ time 8. Ignition mode: automatic ignition. 9. Fuel: Use 0# or -10# diesel. 10. Pressure in the furnace: negative pressure design, no backfire. 11. Combustion efficiency: ≥99.9%; Reduction rate of incineration heat: <5%. 12. Noise: ≤ 75dB(1 meter). 13. Machine power: <=17KW 14. Voltage: 380V 50-60HZ 15. Primary burner power: 0.18KW, fuel consumption: 10-20kg/h 16. Secondary burner power: 0.50KW, fuel consumption: 15-35kg/h 17. Blower: Power: 1.5KW. 18External dimensions: 3600×2200×3700	The waste is: medical waste, disposable syringes, infusion sets, cotton yarn, operating room disposal, residual limbs, rubber gloves, waste protective clothing and infectious and harmful venereal diseases bed supplies
2	Quenching spray tower	1	1. Material: 304 stainless steel 2. Equipped with 304 stainless steel high pressure sprinkler. 3. Including 2 circulating pumps (one with one standby), flow ≥15m³/h, lift ≥20 meters, motor power: ≥2.2KW. 4. Specification: Φ1200mm* 3100mm
3	Deacidification tower	1	1. Material: 304 stainless steel. 2. Equipped with 304 stainless steel high pressure sprinkler. 3. Including 2 circulating pumps (one with one standby), flow ≥15m³/h, lift ≥20 meters, motor power: ≥2.2KW. 4. Specification: Φ1200mm* 3100mm
4	Cyclone dust collector	1	1. Material: 304 stainless steel. 2.Specification:Φ1500mm*3300 mm
5	Activated carbon adsorber	1	1. Material: 304 stainless steel. 2. Specification: Φ1200mm* 3100mm
6	Bag dust collector	1	1. Material: Q235 steel. 2. Specifications 3800×2400×1600 3. Dust removal efficiency: ≥48. 4. The cloth bag adopts high temperature resistant cloth bag
7	Air compressor	1	Motor power: 3KW pressure:6-8Mpa
8	High temperature resistant flue	1	Material: Q235 carbon steel material, internal cast refractory material. Specification: Φ500*2900
9	Fuel tank	1	Material: Q235 carbon steel material. Specification: Φ1000*1000
10	Electric control cabinet	1	Material: galvanized sheet Electricalcomponents:domestic Zhengtai brand Function:1.Fault display, leakage protection 2. Temperature display.
11	Induced draft fan	1	1. Type: high-pressure centrifugal fan 2. Wind pressure: ≥4500Pa, 3. Air volume: ≥2800m³/H 4. Motor power :≥5.5KW The impeller is made of 304 stainless steel
12	water pump	2	Material: stainless steel   flow rate ≥ 15m³/h, head ≥ 20 meters, motor power: ≥ 2.2KW.
13	burner	2	Primary burner power: 0.18KW, fuel consumption: 10-20kg/h Secondary burner power: 0.50KW fuel consumption: 15-35kg/h
14	fan	2	Voltage: 220V50/60HZ Power: 0.75KW Air volume: 1200m³/H
15	Independent chimney	1	1. Material: stainless steel, 2. Specification: Φ460mm, height 12 meters 3.Contains a smoke monitoring port.

Main Characteristics And Scope of Application
   LDF series of medical waste incinerator, produced by Shandong Lvdu environmental equipment Co., Ltd, introduced the world's most advanced medical incinerator technology, and have developed independent intellectual property rights of the gaebage icinerator processing equipment, which developed by our own technical experts and research organizations. The equipment is totally enclosed, small size, high efficiency of burning. It has reasonable process, high technology, and less hazardous.LDF series of medical waste incinerator has wide applications such as hospitals, hotels, railway stations, large commercial institutions, enterprises and institutions.

Packaging & Shipping

 

Certifications

 

FAQ:
1.Q:Are you a factory or trading company
A: We are a factory, we have rich experience for manufacuring water processing equipment for more than 10 years.
 2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in No.C2 South District, Hengyuan Economic Development Zone,Linyi county ,Shandong Province It is about 1 hours from Jinan airport, Jinan Train station and Dezhoud train station. We can pick you up if you need, welcome to visit our factory.
 3.Q: Do you have  minimum order quantity request?
A: No minimum order, but it can get a discount if you order a large quantity.
 4.Q: Do you have  certificates?
A: Yes, we have ISO45001:2018,ISO9001:2015,CE,SGS certificate.
 5.Q: Can you meet my special requirements for my products?
A: Yes, we have a professional design team. We can provide drawings according to your requirements.
6. Q:How to buy your idea products?
  A:You can provide us your water or waste sources, water or waste quality, flow rate and ground area (connect us for more details).
7. Q:How to pay?
  A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
8. Q:What is the delivery time?
  A: It depends on order quantities. Generally speaking, the delivery time will be within 3 to 5weeks.
9. Q: How to pack the products?
  A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
10. Q: How to keep your equipments from corrosion? 
A: We use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictly according to the standard process.
11. Q: How do you manufacture your equipment ?
  A:Our  machining technology  includes laser/plasma cutting, automatic welding,CNC cutting and bending.
 12. Q:How to install after the equipments arriving destination? 
A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.