Large and Medium-Sized Medical Solid Waste Incinerators

• Customization: Available
• After-sales Service: Lifetime Technical Services
• Warranty: a Year
• Model NO.: LDF-20/30/50/100/150/200/300/500/600
• Condition: New
• Certification: ISO, CE
• Automation: Automatic
• Screw: Multi-Screw
• Treatment: Burning
• Voltage: 380V50/60Hz
• Power: 13kw
• Fuel Consumption: 15-25kg/H
• Processing Capacity: 500 Kilograms Per Session
• Transport Package: Naked Bag
• Trademark: lvdu
• Origin: Shandong China
• HS Code: 8417809090
• Production Capacity: 800 Pieces Year

Product Description

Main Characteristics And Scope of Application
   LDF series of medical waste incinerator, produced by Shandong Lvdu environmental equipment Co., Ltd, introduced the world's most advanced medical incinerator technology, and have developed independent intellectual property rights of the gaebage icinerator processing equipment, which developed by our own technical experts and research organizations. The equipment is totally enclosed, small size, high efficiency of burning. It has reasonable process, high technology, and less hazardous.LDF series of medical waste incinerator has wide applications such as hospitals, hotels, railway stations, large commercial institutions, enterprises and institutions.

No	Item	Qty	Parameter configuration	Remark
1	500Incinerator Main Body	1set	1. Adopt the incineration method of primary pyrolysis gasification + surrounding wind co-combustion + secondary high-temperature combustion + burn-out treatment. 2. Primary combustion chamber volume: >=4.3m³ 3. Secondary combustion chamber volume: >=1.5m 4. Temperature of main combustion chamber: >=400-950ºC 5. Secondary combustion chamber temperature: >=900-1300ºC 6. Material: The furnace body is made of Q235 steel plate, lined with high-alumina refractory brick + high-temperature refractory insulation material, thickness >= 300, temperature resistance >= 1800 7. Incineration capacity: 500 kg/time 8. Ignition method: automatic ignition. 9. Fuel: use 0# or -10# diesel. 10. Furnace pressure: Negative pressure design, no backfire. 11. Combustion efficiency: ≥99.9%; burning heat reduction rate: <5%. 12. Noise: <=75dB (at 1 meter) or less. 13. Machine power: <=10KW 14. Voltage: 380V 50-60HZ 15. Primary burner power: 0.18KW, fuel consumption: 10-20kg/h 16. Secondary burner power: 0.37KW, fuel consumption: 15-30kg/h 17. Blower: Power: 1.5KW.	Wastes include: medical waste, disposable syringes, infusion sets, cotton yarn, operating room disposals, residual limbs, rubber gloves, waste protective clothing, and bed linen for infectious and harmful sexually transmitted diseases, etc.
2	Venturi tube spray tower	1set	1.Material: 304 stainless steel 2.Equipped with 304 stainless steel high-pressure nozzles. 3.Contains 2 circulating pumps (one for use and one for standby), flow rate ≥ 15m³/h, head ≥ 20 meters, motor power: ≥ 2.2KW. 4.Specification: Φ1100mm*2600
3	Raschig ring packed tower	1set	1. Material: 304 stainless steel. 2. Equipped with 304 stainless steel high-pressure nozzles. 3. Packing material; 304  rings are used. 4. Specification: Φ960mm*2600
4	Cyclone dust collector	1set	Material: 304 stainless steel. Specification:Φ1300mm*3300
5	Circulating water tank	1set	Material: 304 stainless steel. Specifications: 2500*1230*750
6	High temperature resistant flue	1set	Material: Q235 carbon steel, Specifications: diameter 500
7	Fuel tank	1set	Material: Q235 carbon steel. Specifications: Φ800*1000
8	Electric control cabinet	1set	Material: galvanized sheet
9	Induced draft fan	1set	1. Type: High pressure centrifugal fan 2. Wind pressure: ≥3507Pa, 3. Air volume: ≥1704m³/H 4. Motor power: ≥4.0KW 5.The impeller is made of 304 stainless steel
10	Independent chimney	1set	1. Material: stainless steel, 2. Specifications: Φ460mm, height 12meters 3. Contains flue gas monitoring port.
11	Ash rake	1set	Material: carbon steel pipe.

FAQ:
1.Q:Are you a factory or trading company
A: We are a factory, we have rich experience for manufacuring water processing equipment for more than 10 years.
 2.Q:Where is your factory located? How can i visit there?
A: Our factory is located in No.C2 South District, Hengyuan Economic Development Zone,Linyi county ,Shandong Province It is about 1 hours from Jinan airport, Jinan Train station and Dezhoud train station. We can pick you up if you need, welcome to visit our factory.
 3.Q: Do you have  minimum order quantity request?
A: No minimum order, but it can get a discount if you order a large quantity.
 4.Q: Do you have  certificates?
A: Yes, we have ISO45001:2018,ISO9001:2015,CE,SGS certificate.
 5.Q: Can you meet my special requirements for my products?
A: Yes, we have a professional design team. We can provide drawings according to your requirements.
6. Q:How to buy your idea products?
  A:You can provide us your water or waste sources, water or waste quality, flow rate and ground area (connect us for more details).
7. Q:How to pay?
  A: TT and L/C are acceptable and TT will be more appreciated. 30% deposit before producing, 70% balance before loading by TT.
8. Q:What is the delivery time?
  A: It depends on order quantities. Generally speaking, the delivery time will be within 3 to 5weeks.
9. Q: How to pack the products?
  A: We use standard package. If you have special package requirements, we will pack as required, but the fees will be paid by customers.
10. Q: How to keep your equipments from corrosion? 
A: We use the world-famous paint, like SigmaCoatings,PainBow,etc. What's more, we paint strictly according to the standard process.
11. Q: How do you manufacture your equipment ?
  A:Our  machining technology  includes laser/plasma cutting, automatic welding,CNC cutting and bending.
 12. Q:How to install after the equipments arriving destination? 
A: We will provide detailed illustrations to you. If it is necessary, we will send technicians to help you. However, the visa fee, air tickets, accommodation, wages will be paid by buyers.